Kiet Rail Based Shiplifting Equipment

Model NO.: KET Series
Color: Customerized
OEM: Yes
Market: Global
Current: 4.85A
Trademark: Kiet, Enerpac, Hytorc, Titan, Powerteam
Transport Package: Wooden Package or Customised
Origin: Jiangsu, China
Model NO.: KET Series
Color: Customerized
OEM: Yes
Market: Global
Current: 4.85A
Trademark: Kiet, Enerpac, Hytorc, Titan, Powerteam
Transport Package: Wooden Package or Customised
Origin: Jiangsu, China
 
                                    Kiet Rail Based Shiplifting Equipment

 KIET Fluid Bed Rail Based Ship Launch System  is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects. The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 150 tons.
Kiet Rail Based Shiplifting Equipment
Kiet Rail Based Shiplifting Equipment
Kiet Rail Based Shiplifting Equipment

Parameter:
Hydraulic system configuration
Nominal Lifting Capacity 150t
Working Pressure 25MPa
Hydraulic Lifting Power 2.2Kw
Lifting Cylinder(Double Acting Mechanical Lock Nut Cylinder ) 150T,Stroke: 250mm
Compensation Valve 70MPa Ultra High  Compensation Valve
Power 380V,50HZ,Three Phase
Current 4.85A
Walking system configuration
Wheel Base 1300mm
Track Gauge 1000mm
Walk Gear Quantity 4 units
Walk Gear Pressure 38 t
Walk Gear Diameter 800mm
Driving Torque(Maximum) 30000N.m
Walking Speed At Heavy Load Condition 3m/min
Walking Speed At No - Load Condition 6m/min
Traveling Driver Motor Power  7.5Kw
Vehicle Dimensions 2700x1300x1050~1300
Orbit Model QU100/P50
Motor + Reducer Triple Reduction
Vehicle's Self Weight Around 5t
Berth Bogie's Maximum Walking Distance at every turn Made By the Orbit
Power  380V,50HZ,Three Phase
Current 14.9A
Cable Trailer configuration
Cable Capacity According to the requirement
Track Gauge 1000
Wheel Base 1900
Walk Gear Quantity 4
Wheel Pressure 18t/unit
Wheel Diameter 500mm
Power 3Kw
Self Weight(cable included)(t) ~6.8A
Maximum Output Current of Collector(A) 120A
Orbit Model P43/P50
Maximum Height <1.2m
Joint Current 150A
Main Power Supply 380V,50HZ,Three Phase

1. Lifting system
 with a set of ultrahigh pressure doublestage pump, it can achieve the fast lifting at noload condition and slow lifting at heavy load condition for improving the working efficiency, the compensation valve equipped on the cylinder guarantees the safe and stable decline. Using double acting mechanical lock nut cylinder can save operating time. 
 

2. Walking system
Structured with motor and reducer, the delivery speed is 3m/min. Low noise and high efficiency.
 
3. Electronic control system

 
Parallel connection power supply and control mode can not only guarantee the single hydraulic vehicle's operation, but also the numerous hydraulic vehicles' synchronous lifting and shuttle. The centralized control cable trailer can control the hydraulic small vehicles concurrently. Long distance power supply to the system can be achieved via the cable drum on the cable trailer for flexible use and wider application scope.



Packaging & Shipping:
 
We provide wooden packing for each hdyraulic product, which can perfectly protect , the shipping can be by express parcel, by air or by sea shipping.



Our Services
    KIET provide one year guarantee for all the hydraulic products. We promise if there is any dysfunction of the hydraulic cylinder during the quality warranty not by outside force, we will replace a new cylinder for free. Any quality defects reported by customers will be responded within 24 hours.


Company Information
Kiet Rail Based Shiplifting Equipment


Jiangsu Canete Machinery Manufacturing Co.,Ltd. is a manufacturer engaged in design and manufacturing hydraulic cylinders (capacity covers from 10- 1000 tons), synchronous PLC hydraulic system, hydraulic pumps, hydraulic torque wrenches, and electric torque wrenches, and hydraulic components.
      We successfully transformed from OEM manufacturer for Enerpac, Titan, to create our own brand KIET, and our factory has been approved by CE, ISO9001:2008 consecutively.
     Our customers includes many big Chinese industrial companies:China Petroleum, Baosteel, Sinopec, China State Grid, Jiangnan Shipyards, Sany Group, China Railway Construction Corporation.
     Our synchronous PLC hydraulic system had played a great role in the China high-speed railway constructions. In 2011, our sales revenue reached 30 million USD, making us one of the leaders in the Chinese hydraulic cylinders market especially in the extra-high hydraulic cylinders for industrial area and construction field.
 
         We are a manufacturer in tools, such as:
Hydraulic cylinders, jacks (5-1000ton), single acting and double acting, hollow plunger;
Hydraulic/ electric /pneumatic torque wrench (100-72000Nm);
Hydraulic bolt tensioner (100-11486NM); Hydraulic pullers (5-100 ton)
Hydraulic pumps, manual and electric type (max up to 3000bar);
Integrated hydraulic lifting system solutions ( 4-72 points lifting system for house translation or leveling, bridge supporting and tank welding supporting)
Hydraulic nut and couplings. (M50-Tr1000)
Our products have been widely used in industrial field such as steel plant, cement industry, chemical and refinery, bridge, railway construction and maintenance.
Kiet Rail Based Shiplifting Equipment

Kiet Rail Based Shiplifting Equipment

Contact Information:
Contact Person: Handy Han
Mobile: +86  1800-5263-911
Office:  +86-523-81569666                                  
Fax:  86-523-86186999/86183388
                               Website:www.kaientehydraulic.com  

   
                                    Kiet Rail Based Shiplifting Equipment

 KIET Fluid Bed Rail Based Ship Launch System  is designed to transport ships between a ship lift and dry berth on land. The transfer system is a robust, easy-to-operate system that requires little maintenance. It can be submerged and stored outdoors without damage or adverse effects. The Rail Transfer System runs on rails and can move both in lateral and transverse directions. The transfer system will move the vessel on a fluid bed with full control over the forces to the hull and the wheel loads. The system consists of a number of transfer trolleys, each with lifting capacity up to 150 tons.
Kiet Rail Based Shiplifting Equipment
Kiet Rail Based Shiplifting Equipment
Kiet Rail Based Shiplifting Equipment

Parameter:
Hydraulic system configuration
Nominal Lifting Capacity 150t
Working Pressure 25MPa
Hydraulic Lifting Power 2.2Kw
Lifting Cylinder(Double Acting Mechanical Lock Nut Cylinder ) 150T,Stroke: 250mm
Compensation Valve 70MPa Ultra High  Compensation Valve
Power 380V,50HZ,Three Phase
Current 4.85A
Walking system configuration
Wheel Base 1300mm
Track Gauge 1000mm
Walk Gear Quantity 4 units
Walk Gear Pressure 38 t
Walk Gear Diameter 800mm
Driving Torque(Maximum) 30000N.m
Walking Speed At Heavy Load Condition 3m/min
Walking Speed At No - Load Condition 6m/min
Traveling Driver Motor Power  7.5Kw
Vehicle Dimensions 2700x1300x1050~1300
Orbit Model QU100/P50
Motor + Reducer Triple Reduction
Vehicle's Self Weight Around 5t
Berth Bogie's Maximum Walking Distance at every turn Made By the Orbit
Power  380V,50HZ,Three Phase
Current 14.9A
Cable Trailer configuration
Cable Capacity According to the requirement
Track Gauge 1000
Wheel Base 1900
Walk Gear Quantity 4
Wheel Pressure 18t/unit
Wheel Diameter 500mm
Power 3Kw
Self Weight(cable included)(t) ~6.8A
Maximum Output Current of Collector(A) 120A
Orbit Model P43/P50
Maximum Height <1.2m
Joint Current 150A
Main Power Supply 380V,50HZ,Three Phase

1. Lifting system
 with a set of ultrahigh pressure doublestage pump, it can achieve the fast lifting at noload condition and slow lifting at heavy load condition for improving the working efficiency, the compensation valve equipped on the cylinder guarantees the safe and stable decline. Using double acting mechanical lock nut cylinder can save operating time. 
 

2. Walking system
Structured with motor and reducer, the delivery speed is 3m/min. Low noise and high efficiency.
 
3. Electronic control system

 
Parallel connection power supply and control mode can not only guarantee the single hydraulic vehicle's operation, but also the numerous hydraulic vehicles' synchronous lifting and shuttle. The centralized control cable trailer can control the hydraulic small vehicles concurrently. Long distance power supply to the system can be achieved via the cable drum on the cable trailer for flexible use and wider application scope.



Packaging & Shipping:
 
We provide wooden packing for each hdyraulic product, which can perfectly protect , the shipping can be by express parcel, by air or by sea shipping.



Our Services
    KIET provide one year guarantee for all the hydraulic products. We promise if there is any dysfunction of the hydraulic cylinder during the quality warranty not by outside force, we will replace a new cylinder for free. Any quality defects reported by customers will be responded within 24 hours.


Company Information
Kiet Rail Based Shiplifting Equipment


Jiangsu Canete Machinery Manufacturing Co.,Ltd. is a manufacturer engaged in design and manufacturing hydraulic cylinders (capacity covers from 10- 1000 tons), synchronous PLC hydraulic system, hydraulic pumps, hydraulic torque wrenches, and electric torque wrenches, and hydraulic components.
      We successfully transformed from OEM manufacturer for Enerpac, Titan, to create our own brand KIET, and our factory has been approved by CE, ISO9001:2008 consecutively.
     Our customers includes many big Chinese industrial companies:China Petroleum, Baosteel, Sinopec, China State Grid, Jiangnan Shipyards, Sany Group, China Railway Construction Corporation.
     Our synchronous PLC hydraulic system had played a great role in the China high-speed railway constructions. In 2011, our sales revenue reached 30 million USD, making us one of the leaders in the Chinese hydraulic cylinders market especially in the extra-high hydraulic cylinders for industrial area and construction field.
 
         We are a manufacturer in tools, such as:
Hydraulic cylinders, jacks (5-1000ton), single acting and double acting, hollow plunger;
Hydraulic/ electric /pneumatic torque wrench (100-72000Nm);
Hydraulic bolt tensioner (100-11486NM); Hydraulic pullers (5-100 ton)
Hydraulic pumps, manual and electric type (max up to 3000bar);
Integrated hydraulic lifting system solutions ( 4-72 points lifting system for house translation or leveling, bridge supporting and tank welding supporting)
Hydraulic nut and couplings. (M50-Tr1000)
Our products have been widely used in industrial field such as steel plant, cement industry, chemical and refinery, bridge, railway construction and maintenance.
Kiet Rail Based Shiplifting Equipment

Kiet Rail Based Shiplifting Equipment

Contact Information:
Contact Person: Handy Han
Mobile: +86  1800-5263-911
Office:  +86-523-81569666                                  
Fax:  86-523-86186999/86183388
                               Website:www.kaientehydraulic.com  

 

NINGBO RUICAN MACHINERY COMPANY has the rich casting experiences for Sand Casting more than 10 years. Including mining industries, Valves, Auto Parts, pumps etc.  Experience terms(sales person and technical workers) for good service(before sales service and after sales service) We will design as per the customers drawings or samples. 


The material includes ductile iron, gray iron, aluminum, bronze etc. 
The surface treatment is including painting, powder coating,polishing, heat treatment galvanization, anodize etc.
Complete machining, such as machining centre, CNC machining, lathe, milling machining, drilling, Hydraulic press etc.


We are a cast iron manufacturer specializing in Gray Iron and Ductile Iron Casting. We make casting using common sand and resin sand.

Valve Castings

Valve Castings,Valve Body Casting,Valve Parts Casting,Rotary Valve Castings

Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com

Posted on