LED lighting reduces production costs and promotes industry development


The industry believes that the time to eliminate incandescent lamps will not exceed 10 years, which means that the replacement of incandescent lamps, energy-saving lamps, tungsten halogen lamps and LED lamps, will occupy the market gap after the incandescent lamp exits.
But before the LED market enters a mature period, too high a price will become a bottleneck for its development. Therefore, various low-cost technical solutions will be the issues that enterprises in the industry need to pay attention to in the future. In addition, the life of LED products can be as long as 20,000 hours, but subject to the life of each component, and the maintenance cost of LED lamps is too high. Affected by these various factors, the driving power of LED lamps must have high reliability. Since the LED lamp is an energy-saving product, the driving power efficiency of the LED lamp must be high, but the driving power supply efficiency is high, and the industrial cost is also indirectly increased.
In fact, although the LED driver power supply has made a breakthrough in technology, the cost has been maintained at around 200 yuan. If the sales price is less than 400 yuan, it is basically a loss state, while foreign manufacturers such as Philips have the lowest sales price but can achieve 180 yuan. about. The future popularity of LED lamps depends on the speed at which their prices fall, and the 40 cost of LED lamps is spent on driving control circuits, so the cost reduction of control circuits including LED driver ICs is crucial. Correspondingly, the cost of the drive control circuit is expected to decrease between 2013 and 2015.
At present, China's LED lighting market presents a good development trend. The National Development and Reform Commission has now announced the "Semiconductor Lighting Energy Conservation Industry Plan". It is expected that in 2015, all incandescent lamps for general lighting above 60W will be eliminated, and the market share of LED new light source lighting products will reach 20 or more.
Although national policies and market application prospects are alleging that LED lights are the mainstream of the future lighting market, factors such as high price and insufficient brightness hinder the development of the LED home lighting market, and it takes about 8-10 years to reach the market penetration rate of 50. The high price has also kept most ordinary consumers in a wait-and-see state, making it difficult for LED lighting to enter the door of ordinary people's homes. Experts predict that LED home lighting will not enter market maturity until 2016.

The most widely used series whose shape is rectangle especially suitable for lifting and transporting billet , steel ingot, bloom, etc., and round , profiled steel as well. Different magnetic circuits are designed for different steels

1. Our History:

LITE Crane Co., LTD has focused on top quality Crane Parts for over 14 years in China. We started as a small operation, but now have become one of the leading suppliers in the crane industry in China.

Today, LITE Crane Co., LTD has been one of the top producers of quality crane and crane parts, such as: Electric Hoist, single, double girder bridge, gantry, grab, casting, explosion-proof crane series and accessories.

 

2. Our Factory:

LITE Crane Co., LTD is located in Xinxiang, Henan Province China. The company covers an area of 680 thousand square meters and owns more than 2700 employees. The annual sales of LITE Crane Co., LTD is 1.6 billion USD, there are more than 600 sales agencies at home and abroad and more than 180 middle& senior engineering and technical personnel who are in charge of design and development of all products and also own the development center of their new technology and products. 

                

3.Our Product:

Our Products includes the following:

 

1, Crane accessories

2, Electric hoist

3, Single - beam cranes

4, Double - beam cranes

5, Bridge Crane

6, Gantry Crane

7.Lifting equipment and accessories

We supply crane products all over the globe to a wide range of companies worldwide.

 

 

4.Product Application:

The products are widely used in the following industry, such as power plants, nuclear power, water conservancy, tunnels, bridges, petrochemical, metallurgy, construction, open-air warehouse, wharf, workshop ...

 

5.Our Certificate:

Our company is a member of China Crane Association and vice chairman company of China Heavy Machinery Association. It owns the production licenses of electric hoist, single & double-girder crane, the safety of the approval certificate of manufacturing, installation and maintenance, the safety approval certificate of the manufacturing of 320T bridge crane, portal crane and 280Tcasting crane.

The company has passed the quality system certification of GB/T19001 -2008/IS09001:2008, the environmental management system certification of GB/T24001-2004/ISO14001:2004 and the occupational health and safety management system certification GB/T28001-2001.

 

6.Production Equipment:

There are 1600 units of all kinds of processing equipment which can independently accomplish all the processes such as milling, digging, grinding, pulling, boring, rolling, drilling, punching, cutting, bending, welding, testing and heat treatment. 

 

7.Production Market:

Our products are sold to more than 30 provinces, municipalities and autonomous regions in China, and also exported to Australia, Vietnam, India, Thailand and some Southeast Asian countries. The annual sales of double-girder and portal cranes is more than 3600 units, more than 23000 units single-girder cranes, about 23000 units single-girder & double-girder electric hoist and accessories. The production and sales of the single-girder cranes has lead the nation for seven consecutive years and the per capita output and economic benefits are among the best in the same industry.

8.Our service:

Besides our existing molded products, LITECrane Co., LTD also can produce products according to the drawings or samples from our customers. We control the product quality critically for every step during the manufacturing from custom. 



Electromagnet

Small Electromagnet,Strong Electromagnet,Electropermanent Magnet,Powerful Electromagnet

Shandong Lite Electrical Co.,Ltd , http://www.chinacranegroup.com

Posted on